News

contact us


Xinxiang haishan machinery co. LTD

contacts:Mr.Wang

Linkedin Number:13183100118

The phone:18703735803

Fax:0373-6211588

email:Dora@hsjxchina.com

Website:www.hai-shan.com/

lead bronze Centrifugal casting copper Crusher copper pieces

Installation and disassembly of bearings

Your current location: Home > News >

Installation and disassembly of bearings

Release date:2019-09-20 15:37 source:Original click:

 The correct installation method of self-lubricating bearings affects the service life, accuracy and performance. Therefore, the design and installation department should fully study and design the process of bearing installation. Installation should be in accordance with the standard operating line. The steps for standard operations are usually as follows

  (1) Whether the installation of bearings for cleaning bearings and key components of bearing wrinkling is correct affects the accuracy, life and performance. Therefore, the design and assembly department for the installation of bearings

  (2) Check the dimension and finishing of the related parts

  (3) Precision installation

  (4) Strict inspection after installation of bearings

  (5) Provide lubricating oil; hope to open the bearing packaging before installation. General grease lubrication, do not wash, direct filling grease. Lubricating oil lubrication, general also need not be cleaned, but, instruments or high-speed bearings, etc., to be cleaned with clean oil, remove the rust inhibitor coated on the bearings. Bearings with antirust agent removed are easy to rust, so they can not be put aside. Furthermore, bearings sealed with grease can be used directly without washing.

  Installation methods of bearings vary according to bearing structure, fit and condition. Generally, the inner ring needs interference fit because it rotates mostly on axis. Cylindrical bore bearings are usually pressed by press or hot-packed. In the case of taper hole, it is directly mounted on the taper axis or installed with sleeve. When mounted to the shell, there are usually many clearance matches, and the outer ring has excess. Usually, press is used to press in, or there are cold contraction matching methods installed after cooling. When dry ice is used as coolant and condensation is combined with installation, moisture in the air will condense on the surface of the bearing. Therefore, appropriate anti-rust measures are needed.

  Bearings need to be disassembled when parts are regularly inspected or replaced. Usually the shaft and bearing box are almost always used, and the bearings are often used continually. Therefore, structural design should take into account that when disassembling bearings, bearings, axles, bearing boxes and other parts should not be damaged, and appropriate disassembly tools should be prepared. When disassembling the sleeve with static fit, the pulling force can only be applied to the sleeve, and the sleeve can not be pulled through the rolling body.

Relevant news:

Online Service
share
Leave us a message
Please enter your message here and we will contact you as soon as possible。
Name
Contact
phone
Landline/mobile phone number
Can't see? Click on the change